PIX 13
Leeds Test Objects’ PIX-13 phantom is designed to be used to check the image quality performance of digital radiography x-ray systems. These tests should be carried out at acceptance to establish a baseline, and on a routine basis, keeping an on-going record of the test results, which will indicate any deterioration in performance.
PIX-13 features the following test details:
-
Tube axis direction markings
-
Limiting spatial resolution (0.6 – 5.0 LP/mm)
-
Low contrast resolution details (6 x 15mm diameter details)
-
Dynamic range (7 different thickness Cu steps)
-
Unstructured are for placement of dosemeter
-
Unstructured area for homogeneity and signal adjustment (centre-marked)
-
Cassette size alignment markers (radiopaque)
-
X-ray to light field alignment markers (radiopaque)
PIX-13 should be used with either PMMA/Cu or Al attenuator plates (available separately).
The phantom is supplied in a soft protective carry bag.
Conforms to standards:
-
DIN 6868-13